Are you tackling a project that requires cutting through a lot of metal? Step away from the saw, and get it done faster and easier with the Pro-Series Plasma Cutter. Increase your productivity and save the saw blades.
A duty cycle of 35% @ 40A means this plasma cutter will cut continuously for 3.5 minutes when cranked up to the maximum amperage before needing to cool down. Cuts through 3/8 inch mild steel, 1/4 inch aluminum, 1/4 inch stainless steel, 1/4 inch galvanized metal, 1/8 inch copper, and 1/8 inch brass.
Includes everything you need to get started: 18.5 Ft Cutting Torch, 10 Ft Earth Cable With Clamp, 3 Pieces Nozzle, 3 Pieces Electrode
Single Phase 230V-60HZ, 25A Max, output 120 volt DC,
Duty cycle 35 percent at 40 amps, no-load voltage 340 volt
Air pressure 4.5 CFM at 60 PSI, Working air pressure range = 40-90 PSI
Pilot arc feature cuts expanded metal
IGBT inverter plasma cutter with thermal overload protection and built-in gas regulator