SO DISAPPOINTING! This item is currently out of stock. The good news is, as soon as we have it you can be the first to know.

Item #: 116459 |View all from Medlift

Medlift 1100 Two-Way Reclining Encounter Lift Chair

(1175-EBL-USB)
Medlift 1100 Two-Way Reclining Encounter Lift Chair - 1175-EBL-USB from BEYOND Stores
List Price: $1139.00
$876.15
+ Free Shipping!
You Save: $262.84 (23%)
Total: $876.15
Add to Cart
 
1100 by Medlift from BEYOND Stores
Shop all Medlift products
Shop all 1100 collection

Total: $876.15
Add to Cart
Availability: In Stock
Description
The #1175 series is a new 2-way reclining lift chair that features a 2 heat & vibe as a standard feature, and also is designed with a 325 lb. weight capacity. There is a two-year warranty on all components. This model features a more contemporary look with a waterfall backrest. Recommended height range: 5'4" to 6'0". Battery back-up is not available with 2 Vib/Heat at this time).
Features
  • Magazine pocket on lower outer right-hand side of chair.
  • The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are Grade 5 (Medlift is the only lift chair mfr. using this grade of bolt). All bolts go entirely through the wood; no lag screws are used to secure the mechanism. The mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for the reclining hardware, etc., have a double locking nut of the highest aircraft grade quality. All wood screws used are the strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to ensure that the back stays straight and square.
  • All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit. Seat spring are correctly spaced on the spring rails by a special clip rail machine. The front seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durable. There is also a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure that the seat springs do not cut into the bottom of the seat foam, we use a nova bond pad. The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best we can find in the industry. This feature makes the backs retain their original shape, while also offering greater comfort.
  • Acella-Flex foam, which was developed by Leggett & Platt is the only foam we use. It offers the closest thing to a "perfect seating configuration" that is available in the industry. Acella-Flex basically pushes back 1 pound for every pound of weight that is exerted on it. This characteristic makes the chairs basically, sit the same for a 90 lb. person as for a 300 lb. person. This foam will keep 99.9% of its original shape and size, whereas, most conventional foam will shrink 10 - 15% in size over the first few years. We also use a special break-in process before the foam is ever cut to make the foam feel good from the first use on. As an added benefit to this foam, we also glue a layer of super soft on top of the Acella-Flex which gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long life. This feature also makes the seat foam pressure-reducing.
  • The foundation of the chair is the lift base. After testing all the lift bases on the market today, we have determined that the Super Sagless lift base (made in the USA) is the best available. While more expensive, it will withstand constant use and abuse that a lift chair must endure. A lift base must be as wide as the base of the chair, and the Super Sagless base we use is the most stable base in the upright lifted position that is available in the marketplace today. This chair features a low volt quiet motor. Battery back-up is a standard feature.
  • All fabrics used on any Medlift chair meets both CAL 117 and UFAC requirements for flammability. We have independent labs test our fabric, foam, and fibers once a year to ensure that they meet correct specifications. We cannot attach the UFAC tag or purchase the tags if our components do not pass this testing. We also make sure that before any upholstery is placed on the frame, that no fabric comes in direct contact with wood. The wood frame that might come in contact with fabric is surrounded by an extra layer of foam or micro-foam to ensure a long fabric life. This extra padding makes the arms, arm fronts, backs, etc. feel softer and more plush.
  • Fiber - 5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners & miscellaneous - 5%
Product Details
See Similar Products
Dimensions & Weights
Specific Dimensions
  • Minimum Height: 41.5
  • Minimum Width: 31.5
  • Minimum Depth: 41
  • seat height of 19" from the floor
  • seat depth of 19.5"
  • backrest height from top of the seat is 25"
  • Height of footrest when reclined is 19" from the floor
  • When reclined, the back of the seat to the footrest tip is 37"
 
ALSO IN THIS COLLECTION
The product you are viewing is part of 1100 by Medlift. Other collection items include:
View all products from the 1100